How To 4-Step Buttonholes - Gemini STITCH-L100 Manual

How to Sew 4-Step Buttonholes
Prepare
Measure the diameter and thicknes of the button and add
0.3cm ( ⁄ ) for bar tacks; mark the buttonhole size on the
fabric.
Place the fabric under the foot so that the markings on the
fabric line up with the corresponding markings on the foot.
Lower the foot so that the buttonhole centre line marked on
the fabric aligns with the centre of the buttonhole foot.
Adjust the stitch length dial between "0.5" to "1" to set the
stitch density.
Note:
Density varies according to the fabric.
Always test sew a buttonhole on the fabric you are using to
sew the buttonhole.
Follow the 4-step sequence changing from one step to another
with the stitch pattern selector dial. Take care not to sew too
many stitches in steps 2 and 4. Use a seam ripper and cut the
buttonhole open from both ends towards the middle.
24