Threading The Upper Thread - Gemini STITCH-L100 Manual

Threading the Upper Thread

Caution:
Before threading, turn power
switch to "O".
Raise the needle to its highest
position. Follow exactly the num-
bered threading sequence illustrat-
ed. If you skip a step or fail to
properly engage the thread in any
of the thread guides, the machine
will not sew properly. (Pic 1 to 5)
Continue to draw the thread down
and into the needle bar thread
guide. Use the automatic needle
threader (page 13), or manually
insert the thread through the eye of
the needle from front to back. Use
the thread cutter to leave about
10cm (4") of thread loose behind
the needle. (Pic 6)
a. Spool Pin
b. Spool Holder
12