Patch Work - Gemini STITCH-L100 Manual

Patch Work

These stitches are used to join two pieces of fabric while
leaving a space between their edges.
1. Fold over the edges of the two pieces of fabric for the
hem and tack the edges to a thin piece of paper by hand,
leaving a small space between them.
2. Turn the pattern selector dial so that the stitch display
shows the letter "G". Turn the stitch length dial to "S1"
3. Stitch along the edge, pulling both threads slightly
when beginning to sew.
*Use thicker than normal threads for sewing.
4. After sewing, remove the tacking stitches and the paper.
Finish by tying knots on the reverse side at the beginning
and the end of the seams.
39