Programmed Playback - Sanyo DTA-2680 Instruction Manual

To repeat a track or disc
Press REPEAT button on remote control one time,
"one track repeat" will be active. "REPEAT" shows
on display.
One track repeat
Random play function
Press RANDOM button on remote control during
CD play or stop mode to start random play.
Pressing once again will cancel the function.
Random playing start
Note: Random play cannot operate while playing
programmed tracks.

PROGRAMMED PLAYBACK

The CD player enables you to program up to 64 tracks in a sequence of your choice. First select CD stop
mode.
1. Press the PROG button one time.
Program input mode
2. Press the SKIP Forward or Backward buttons
to select the desired track to be programmed.
For example:
Choose track 4
3. Press PROG button again; then track 4 is
stored.
With one more press, "all track repeat" will be active.
"REPEAT ALL" shows on display.
All track repeat
With one further press, the repeat mode is
cancelled.
Intro play function
In the stop condition, press the INTRO button to start the
intro playing. After that the first 10 seconds of each song
will be played.
If the INTRO button is pressed again, the CD will change to
normal playing mode.
Intro playing
4. Continue to program, repeat steps 2 and 3.
Reviewing programs
Press the PROG button repeatedly. The track number
p r o g r a m m e d o n e a c h p r o g r a m n u m be r w i l l b e
displayed.
5. Press PLAY/PAUSE button to play the program
tracks.
Note: If the program function has stopped, press the
PROG button and then press the PLAY/PAUSE button,
the program play will start.
Clear the program
In stop mode, press the PROG button one time and then
press the STOP button. The preset programs will be
cancelled.
20