Power On/Off; Setting The Time - Sanyo DTA-2680 Instruction Manual

3-piece audio system with ipod docking
Table of Contents

Advertisement

POWER ON/OFF

When the AC power is connected, "-- -- : -- --" shows on the LCD display.
1.
Press the POWER/STANDBY button to turn the unit 'ON'.
Note: The LCD display lights up and "HELLO" greeting
shows on display, the STANDBY LED light goes off.
Volume at 13 (max 30).
2.
You can now select your desired music source by
pressing one of the function buttons: TUNER/BAND or
CD PLAY/PAUSE
or AUX or iPod on main console.
3.
To switch to POWER OFF, press the POWER/STANDBY
button to turn the unit 'OFF'. "GOOD BYE" appears on
display. The STANDBY LED lights.
4.
Display back light ON/OFF won't be affected by power
ON/OFF.
NOTE: Please turn off the unit to standby mode before disconnecting main power supply from the unit.

SETTING THE TIME

When the unit is first connected to an AC power outlet, the display
shows "-- -- : -- --". To set the clock to the current time proceed as
follows:
1.
In power off mode, press and hold the PROG button for 2
seconds, the "12" hour digits begin to flash.
2.
Press the
/
to select your desire either 12 or 24
hour clock time format.
3.
Press the PROG button to hour mode until the hour flashes.
4.
Press the
/
to adjust the hour time while it is
flashing. Be sure to set the hour correctly for AM or PM.
5.
Press PROG button once to minute mode and the minutes will flash.
6.
Press the
/
to adjust the minute time while it is
flashing.
7.
Press the PROG button once more, the display
stops flashing and the clock begins to run.
OPERATING INSTRUCTIONS
15
/ON
Example : FM mode
/ON

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents