Sanyo DTA-2680 Instruction Manual page 10

INSTALLATION (Speakers and Decorative Insert)
DISASSEMBLE AND FIX THE DECORATIVE INSERT
To remove the insert, release 3 pcs
screws (1), then pull out the insert from
the main unit.
PLACE AND FIX THE SPEAKER
Insert the speaker stud into the hole of the
main unit (1).
Push the speaker backward to the end until it
clicks (2).
DISASSEMBLE THE SPEAKER
Push the speaker forward from the back side
(1).
Release the speaker from the main unit
speaker holder (2).
1
To fix the insert, place it with two holes
into main unit speaker holder (2), then fix
it by 3 pcs screws (3).
9
2
3
1
2
1
2
1
2
2