Sanyo DTA-2680 Instruction Manual page 17

TIMER ON/OFF SETTING
NOTE: The clock should be adjusted before the Timer On/Off setting.
Press the SUREWAKE TIMER button on remote control
1.
once, the TIMER ON indicator and hour digit begin to
flash.
2. Press the / to adjust the hour time up or
down. Be sure to set the hour correctly for AM or PM.
3. Press the SUREWAKE TIMER button once, the minute
digits begin to flash.
4. Press the / to adjust the minute time up or
down.
5.
Press the SUREWAKE TIMER button on remote control
again, the TIMER OFF indicator and hour digit begin to
flash.
6. Press the / to adjust the hour time up or
down. Be sure to set the hour for correctly for AM or
PM.
7. Press the SUREWAKE TIMER button once, the minute
digits begin to flash.
8.
Press / button to adjust the minute time up or
down.
9. Press the SUREWAKE TIMER button once;
setting to: TUNER or CD or iPod are selected
by pressing the /
10. Press the SUREWAKE TIMER button, then press
the / to select the volume level.
11. Press the TIMER button on remote control once more, then the Timer On and Off adjustment is finished with the
" " display remaining ON (The SUREWAKE TIMER setting will show you once on display).
Note: Timer function with SUREWAKE starts the music quietly and then increases the volume to room level or your
selected volume level to make sure you are awake.
To cancel the Timer On setting, press SUREWAKE TIMER button on remote control until "
Note : To turn off the set while timer is on, press POWER button.
SETTING THE SLEEP
Pressing SLEEP button on remote control permits
settings from 10 to 90 minutes. When the desired time
appears, releasing your finger will set the time.
(Pressing "SLEEP" after the 10 minute showed, sleep
timer position will cancel the sleep timer.)
Change of SLEEP Setting
button.
90 60
80 70
50 30 20
40
16
" display goes off.
10