Engine Oil Drain Pump - Mercury T6200 TowSport Operation And Maintenance Manual

Section 4 - Maintenance
1. Remove oil fill cap.
2. Add the specified engine oil to bring the level up to, but not over, the FULL or OK range mark on the dipstick. Check the oil
level.
3. Replace the fill cap.
All Models
Engine oil (with filter)

Engine Oil Drain Pump

1. Loosen the oil filter to vent the system.
2. Remove the dipstick.
3. Install the oil pump onto the dipstick tube.
a
b
4. Insert the hose end of the crankcase oil pump onto an appropriate container and use the handle to pump until the
crankcase is empty.
5. Remove the pump.
6. Install the dipstick.
Page 32
V-drive model shown
In-line drive model shown
Capacity
4.7 L (5 US qt) Mercury/Quicksilver 25W‑40 Synthetic Blend Engine Oil, NMMA FC‑W
a -
b -
c -
c
mc70571-1
58405
58404
Fluid Type
Oil pump
Dipstick tube
Oil drain hose
90-8M0128975 JUNE 2017
eng