Owner/Operator Responsibilities; Dealer Responsibilities; Cleaning Care Recommendation; Cleaning Gauges - Mercury T6200 TowSport Operation And Maintenance Manual

Section 4 - Maintenance

Owner/Operator Responsibilities

It is the operator's responsibility to perform all safety checks, to ensure that all lubrication and maintenance instructions are
complied with for safe operation and to return the unit to an authorized Mercury MerCruiser dealer for a periodic checkup.
Normal maintenance service and replacement parts are the responsibility of the owner/operator and as such, are not
considered defects in workmanship or material within the terms of the warranty. Individual operating habits and usage
contribute to the need for maintenance service.
Proper maintenance and care of your power package will ensure optimum performance and dependability and will keep your
overall operating expenses at a minimum. See your authorized Mercury MerCruiser dealer for service aids.

Dealer Responsibilities

In general, a dealer's responsibilities to the customer include predelivery inspection and preparation such as:
• Ensure that the boat is properly equipped.
• Prior to delivery, make certain that the Mercury MerCruiser power package and other equipment are in proper operating
condition.
• Make all necessary adjustments for maximum efficiency.
• Familiarize the customer with the onboard equipment.
• Explain and demonstrate the operation of the power package and boat.
• Provide you with a copy of a Predelivery Inspection Checklist.
• Your selling dealer should fill out the Warranty Registration Card completely and mail it to the factory immediately upon
sale of the new product.

Cleaning Care Recommendation

Cleaning Gauges

IMPORTANT: Never use high‑pressure water to clean gauges.
Routine cleaning of the gauges is recommended to prevent a buildup of salt and other environmental debris. Crystalized salt
can scratch the gauge display lens when using a dry or damp cloth. Ensure that the cloth has a sufficient amount of fresh water
to dissolve and remove salt or mineral deposits. Do not apply aggressive pressure on the display lens while cleaning.
When water marks cannot be removed with a damp cloth, mix a 50/50 solution of warm water and isopropyl alcohol to clean the
display lens. Do not use acetone, mineral spirits, turpentine type solvents, or ammonia based cleaning products. The use of
strong solvents or detergents may damage the coating, the plastics, or the rubber keys on the gauges. If the gauge has a sun
cover available, it is recommended that the cover be installed when the unit is not in use to prevent UV damage to the plastic
bezels and rubber keys.

Cleaning Remote Controls

IMPORTANT: Never use high‑pressure water to clean remote controls.
Routine cleaning of the remote control external surfaces is recommended to prevent a buildup of salt and other environmental
debris. Use a cloth towel which has a sufficient amount of fresh water to dissolve and remove salt or mineral deposits.
When water marks cannot be removed with a damp cloth, mix a 50/50 solution of warm water and isopropyl alcohol to clean the
remote control. Do not use acetone, mineral spirits, turpentine type solvents, or ammonia based cleaning products. The use of
strong solvents or detergents may damage the coating, the plastics, or the rubber components on the remote control.

Maintenance

Performing service or maintenance without first disconnecting the battery can cause product damage, personal injury, or
death due to fire, explosion, electrical shock, or unexpected engine starting. Always disconnect the battery cables from the
battery before maintaining, servicing, installing, or removing engine or drive components.
Fuel vapors trapped in the engine compartment may be an irritant, cause difficulty breathing, or may ignite resulting in a fire
or explosion. Always ventilate the engine compartment before servicing the power package.
IMPORTANT: Refer to the maintenance schedule for the complete listing of all scheduled maintenance to be performed. Some
items should be performed only by an authorized Mercury MerCruiser dealer only. Before attempting maintenance or repair
procedures not covered in this manual, we recommend that you purchase a Mercury MerCruiser service manual and read it
thoroughly.
Page 28
WARNING
!
WARNING
!
90-8M0128975 JUNE 2017
eng