Single Step And Continuous Rotation - SCHOTT VisiLED MC 1500 Manual

48
7.4 Single step and
GB
continuous rotation
The MC 1000 controller makes it possible to turn the segment setting of all
VisiLED illumination units step by step or also to put them into power rotation
mode.
The rotation mode increases the impression of three-dimensionality with
structured objects, especially when viewed with a monitor.
By turning the middle rotation key (19) clockwise the segment setting of the
connected illumination unit moves correspondingly clockwise in 1/8 circle steps.
If the key (19) is turned anti-clockwise, then the set segments move correspon-
dingly anti-clockwise.
By pressing (> 1 s) the rotation key (19) the segment setting begins to rotate clock-
wise in 1/8 circle steps. The rotation is deactivated by pressing the key (19) again.
If required the rotation speed can be adjusted by pressing the rotation key (19)
in rotation mode (> 5 s) until the full-circle flashes. The rotation speed can be
reduced by turning the rotation key (19) anti-clockwise and increased by turning
clockwise. The adjusted speed is stored by pressing the rotation key (19) again.