Intended Use And Important Information - SCHOTT VisiLED MC 1500 Manual

44
3. Intended use
GB
and important
information
Symbols used
Intended use
Safety information
Symbol Maening
Warns of a danger spot
(caution, obey documentation)
Off
On
The VisiLED series is an innovative illumination system using white LEDs,
specially developed for the fields of stereo microscopy and macroscopy. The
system is intended for industrial, laboratory and medical applications. For
medical applications the system is designed to illuminate observation areas
where there is no indirect or direct contact with patients.
Please read and follow these instructions carefully. The VisiLED system's safety
cannot be guaranteed if they are not obeyed.
• In accordance with the EN 62471 standard the LED illuminations of the VisiLED
Series are classed as products under class 1.
• The VisiLED Series illumination system conforms with the following -European
Directives:
2014/35/EU (Low Voltage Directive)
EMV Directive 2014/30/EU
2011/65/EU (RoHS)
The technical documentation and full compliance with the standards
listed below proves the conformity with the essential requirements of
the above-mentioned EC Directives:
EN 61010-1:2010
EN 62471:2008
EN 61326-1:1997 + A1:2013
• LEDs feature a very high luminance. Therefore, do not look directly into the
LEDs when the illumination is switched on (Danger of ophthalmic injury.)!
• To avoid unnecessary stressing of your specimen by illumination with visible
light, reduce the brightness and duration of illumination to the minimum
required.