Mc 750 Operation; Operation Display; Light Intensity Setting; Mc 1000 Operation - SCHOTT VisiLED MC 1500 Manual

When the controller is switched on the operation display (21) is lit green.
The MC 750 makes it possible to adjust the brightness of the connected VisiLED
illumination steplessly. To increase the brightness please turn the
knob (20) clockwise.
To increase reproducibility the adjustment area between the two end positions
at 0% and 100% light is additionally marked with 5 graduation marks.
When the controller is switched on the operating display (21) is lit green.
MC 1000 makes it possible to adjust the light intensity setting of the connected
LED illumination unit steplessly. To increase the brightness turn the lower adju-
sting knob (20) clockwise.
For increased reproducibility the 0% to 100% adjustment area between the
two end positions is additionally marked with 19 graduation marks, i.e. the
scale ranges from 0 to 10, each with an additional mark.
All VisiLED illumination units can be controlled in segments using the MC 1000
controller.
By selecting the optimum segment mode for each specimen an object
contrasting can be achieved which far exceeds the contrasts possible using
a non-segmented illumination unit.
Repeated activation of the select key (18) changes the segment mode. VisiLED
illumination units can be operated in full-circle, semi-circle, quarter-circle and
2-segment mode using the MC 1000.
6. MC 750 operation

6.1 Operation Display

6.2 Light intensity setting

7. MC 1000 operation
7.1 Operating display
7.2 Light intensity setting

7.3 Segment control

47
GB