SCHOTT VisiLED MC 1500 Manual page 40

38
Important properties of
GB
the VisiLED system with
MC 1000 controller
Important properties of
the VisiLED system with
MC 750 controller
The MC 1000 controller can be used to control one VisiLED illumination unit.
The most important illumination parameters: light intensity setting, selection
of four segment modes and rotating illumination in both directions, can be
ergonomically and intuitively controlled using clearly arranged adjustment knobs.
If required, the complete illumination system can be earthed via an ESD connector.
The MC 750 controller can also be used to control one VisiLED illumination unit.
Only the light intensity setting can be adjusted with the controller, meaning it is
the ideal VisiLED control unit for more simple illumination applications.
The VisiLED system is equipped with a thermo guard: the LED temperatures in
each VisiLED illumination are continuously monitored by the controller. Should
the permitted values be exceeded then following a pre-warning the affected
LED unit is switched off. The thermo guard ensures a long lifetime for the LED
illumination unit – even when set at the maximum brightness level.