Table of Contents
Advertisement
e00_VDH_M814.book Page 18 Thursday, October 28, 2004 9:59 AM
Ending alarm recording
When the alarm duration time (default setting: 20 seconds)
ends, "AL" disappears from the operation display, the
ALARM indicator stops flashing, and recording stops.
When the hard disk's remaining space for recording
reaches zero, the FULL indicator lights and recording
stops. You can start recording from the beginning again
by changing the recording setting. ( P.44)
Alarm recording is taken at the [PICTURE QUALITY]
setting made in [3.RECORDER MENU]>[1.REC MODE
SET]. ( P.43)
The following restrictions apply to alarm recording.
(1) After recording starts (Standby→REC/STOP indicator
lights).
(2) After making "PICTURE QUALITY" or "AUDIO
RECORDING" menu settings and returning to the
camera screen.
For (1) and (2):
Alarm input is not recognized for a maximum of 4
seconds. Alarm input after the 4 seconds are
recognized as usual.
Recording does not start for a maximum of 6
seconds regardless of alarm input.
(3) After recording finishes (the REC/STOP indicator turns
off).
Alarm input is not recognized for a maximum of 5
seconds. Alarm input after the 5 seconds are
recognized as usual.
Recording does not start for a maximum of 10
seconds regardless of alarm input.
RECORDING
18
Advertisement
Table of Contents
