Table of Contents
Advertisement
e00_VDH_M814.book Page 41 Thursday, October 28, 2004 9:59 AM
SCREEN SET MENU
9
When you have finished making the
settings, press the [EXIT/OSD] button.
The display returns to the normal screen.
The screen displays the set camera title.
Set camera title
Setting the motion sensor
By setting the motion sensor on the screen, any movement
by the subject will automatically activate alarm recording.
You can set the following items:
Motion detection position on screen
Number of camera for which to set motion sensor
Motion sensor sensitivity (Default setting is OFF.)
[MENU] button
[CHANNEL]
buttons
[
] button
[
1
Press the [MENU] button.
The [MENU] button lights, and the <MAIN MENU>
screen is displayed.
2
Select "2. SCREEN SET MENU", and
press the [
The <SCREEN SET MENU> screen is displayed.
41
H I
A
0 5 - 1 0 - 0 4 0 8 : 3 0 : 35AL 0 0 0 1 5
2
FLOOR 1
[
] button
[ ] button
] button
[EXIT/OSD] button
] button.
3
Select "3. MOTION SENSOR SET", and
press the [
] button.
The motion sensor setting screen for CAMERA NO.
1 appears.
Displays
current
camera
number
4
Press the desired [CHANNEL] button to
select the desired camera number.
H I
A
0 5 - 1 0 - 0 4 0 8 : 3 0 : 3 5 A L 0 0 0 1 5
5
Press the [
] or [
] button to select
"LEVEL," then press the [
button to set the sensitivity.
The level can be set to a value between 1 and 10.
The lower the value, the higher the sensitivity.
(Default setting: OFF)
A confirmation tone sounds when making sensor
settings.
] or [
]
Advertisement
Table of Contents
