Table of Contents
Advertisement
e00_VDH_M814.book Page 39 Thursday, October 28, 2004 9:59 AM
SCREEN SET MENU
MOTION SENSOR SET
If the motion sensor is set on the monitor, alarm recording
is enabled when a moving subject is detected.
Example of set motion
sensor
MONITOR SET
[MENU] button
[
] button
1
Press the [MENU] button.
The [MENU] button lights, and the <MAIN MENU>
screen is displayed.
2
Select "2. SCREEN SET MENU", and
press the [
The <SCREEN SET MENU> screen is displayed.
3
Select "1. MONITOR SET", and press
the [
] button.
The <MONITOR SET> screen is displayed.
39
[
] button
[ ] button
[EXIT/OSD] button
] button.
4
Press the [
] or [
the desired item, then press the [
button.
(1)
(2)
(3)
(4)
Settings (
indicates default setting.)
Item
Setting
1 to 30
seconds
Sets time interval used for switching screens when
(1) SEQUENCE
(1 second
displaying image from each channel sequentially.
units)
1SEC
When alarm occurs, displays image from channel that
FULL
generated alarm in single screen.
(2) DISPLAY
QUAD
When alarm occurs, displays images in quad screen.
Displays alarm images in order starting with the most
LAST
recent when multiple alarms are generated.
ALARM
Displays the first alarm image only when multiple
(3)
FIRST
PRIORITY
alarms are generated.
Cycles through alarm images in one second intervals
SWITCH
when multiple alarms are generated.
ON
Masks image and sound of set channel.
MASK SET
(4)
CH1/2/3/4
OFF
Plays image and sound.
"ALARM PRIORITY" settings are active only when the
"DISPLAY" setting is "FULL."
5
Press the [
] or [
the setting, then press the [
6
Repeat steps 4 to 5 to set other items as
needed.
7
When you have finished making the
settings, press the [EXIT/OSD] button.
The display returns to the normal screen.
] buttons to select
]
Description
] buttons to change
] button.
Advertisement
Table of Contents
