Table of Contents
Advertisement
e00_VDH_M814.book Page 52 Thursday, October 28, 2004 9:59 AM
4
Press the [
] button.
The <WARNING> screen is displayed, with "NO"
flashing.
5
Press the [
] or [
"YES", then press the [
The "HDD INITIALIZING!" screen is displayed, and
the hard disk is initialized.
When the process has finished, the display returns
to the MENU screen.
6
Press the [EXIT/OSD] button.
The display returns to the normal screen.
To add a hard disk
To add a hard disk, contact a Sanyo service center. When
adding a hard disk, use an add-on type hard disk unit (sold
separately).
[Setting conditions]
After adding a hard disk, a message appears at the next
startup, confirming whether you want to initialize the newly
installed hard disk. Select "Yes" to initialize the hard disk. If
you select "No", the hard disk cannot be used.
Hard disk setting screen
MIRRORING
After adding a hard disk, you can record the same
images on both hard disks by setting "MIRRORING" to
"ON". If an image write error occurs on one disk, you will
still be able to read the image from the other disk.
] button to select
] button.
Playback disk
When mirroring is set, the digital video recorder
automatically sets which of the two hard disks to read
the recorded image from.
RECORDER MENU
52
Advertisement
Table of Contents
