Operation; Adjusting The Display; Operation Display Area - Sanyo DSR-M814 Instruction Manual

Sanyo digital video recorder instruction manual
Hide thumbs Also See for DSR-M814:
Table of Contents

Advertisement

e00_VDH_M814.book Page 12 Thursday, October 28, 2004 9:59 AM

OPERATION

1. ADJUSTING THE DISPLAY

At power ON, the operation display area appears at the top
of the monitor screen.The operation display area shows the
date/time, image quality, remaining time, and other
information needed for operations.

Operation display area

Example: Normal screen
(1)
(2)
(5)
Operation
X 1 8 0 H I
display area
0 5 - 1 0 - 0 4 0 8 : 3 0 : 3 5 A L 0 0 0 1 5
(8)
(1) Operation symbol display
Displays symbols for recording, playback, playback
speed, etc.
For the meaning of each operation symbol, see
"Displayed symbols" on the right.
During simultaneous recording and playback, the display
indicates playback ( ).
(2) Picture quality display ( P.44)
Displays the quality of the image that can be recorded
on the hard disk. Set to "HIGH" in the default settings.
(3) Audio recording
Displays "A" when audio recording has been set.
(4) Remaining time display
Unless "OVER WRITE" is set for recording, displays
the remaining amount of available recording time, as
shown below.
Remaining
time
1 hour or more
Less than 1
hour
Less than 10
minutes
(3)
(4)
(6)
(7)
A
Displayed
Example
increment
1 hour
1H
increments
10 minute
10M
increments
1 minute
1M
increments
(5) Date display ( P.34)
Shows the month/day/year.
05-10-04 (month/day/year)
(6) Time display ( P.34)
"PLEASE SET THE CLOCK" is displayed when you
turn the power ON for the first time. The digital video
recorder uses the date and time to manage recording
and playback points.
(7) Alarm display and alarm count display ( P.17)
When you set an alarm using the <ALARM REC
MODE SET> menu item, the alarm display area
displays the following information. ( P.46)
Alarm display
When alarm recording is set, "AL" appears.
During alarm recording, the "AL" display flashes.
Alarm count display
Displays the total number of alarms that have been
generated.
(8) Camera title and VIDEO LOSS display
The title set for each camera is displayed.
"VIDEO LOSS" is displayed when there is no video
input.
12

Advertisement

Table of Contents
loading

Table of Contents