Mini-Usb Device Connection; Emulated Serial Port - Dell EMC ME4 Series Owner's Manual

Table 33. Terminal emulator display settings
Parameter
Terminal emulation mode
Font
Translations
Columns
Table 34. Terminal emulator connection settings
Parameter
Connector
Baud rate
Data bits
Parity
Parmaeter
Stop bits
Flow control
1
Your server or laptop configuration determines which COM port is used for Disk Array USB Port.
2
Verify the appropriate COM port for use with the CLI.
3 In the terminal emulator, connect to controller A.
4 Press Enter to display the CLI prompt (#).
The CLI displays the system version, Management Controller version, and login prompt
a At the login prompt, enter the default user manage.
b Enter the default password !manage
If the default user or password—or both—have been changed for security reasons, enter the secure login credentials instead of the
defaults shown above.

Mini-USB Device Connection

Emulated serial port

Once attached to the controller module, the management computer should detect a new USB device. Using the Emulated Serial Port
interface, the ME4 Series controller presents a single serial port using a customer vendor ID and product ID. Effective presentation of the
emulated serial port assumes the management computer previously had terminal emulator installed. See also
Serial port configuration is unnecessary.
IMPORTANT: Certain operating systems require a device driver or special mode of operation to enable proper functioning of the
USB CLI port. See also
84 Connecting through the CLI port using a serial cable
Device Driver special operations
Value
VT-100 or ANSI (for color support)
Terminal
None
80
Value
COM3 (for example)
115,200
8
None
Value
1
None
mode.
1,2
Supported host applications.