Dell EMC ME4 Series Owner's Manual page 67

Figure 53. IOM latch operation detail
5 Swing the latch handle open as shown in detail No.2 within
Figure 54. Removing an IOM
6 Grip the latch handle and ease the IOM forward from the slot as shown in detail No.2 within
NOTE: Figure 54. Removing an IOM
discussed herein. They all use the same latch mechanism, but feature different face plate geometry.
7 Place both hands on the IOM body, and pull it straight out of the enclosure such that the controller module remains level during
removal.
Transporting CompactFlash
This action applies to single-controller enclosure configurations only. To prevent data loss in this environment, the CompactFlash must be
moved from the failed controller to the new controller module.
CAUTION: Do not transport CompactFlash in a dual-controller environment. Doing so could cause data corruption.
Figure 54. Removing an
shows a 4-port SAS controller module. However, the procedure applies to all IOMs
IOM.
Figure 54. Removing an
Module removal and replacement
IOM.
67