Figure 17. Expansion module detail ME412/ME424/ME484
1
Serial port
3
Disabled SAS expansion port B
NOTE:
RBOD/EBOD configurations
•
When the expansion module shown in
controller modules for adding storage, its middle HD mini-SAS expansion port ("B") is disabled by the firmware.
•
The Ethernet port on the expansion module is not used in controller/expansion enclosure configurations, and is disabled.
Power cooling module
Figure 18. Power cooling module (PCM)
enclosures. The PCM includes integrated cooling fans. The example shows a PCM oriented for use in the left PCM slot of the enclosure
rear panel.
Figure 18. Power cooling module (PCM)
1
PCM OK LED (Green)
3
Fan Fail LED (Amber/blinking amber)
5
On/Off switch
7
Release latch
LED behavior:
•
If any of the PCM LEDs are illuminated amber, a module fault condition or failure has occurred.
•
For a detailed description of PCM LED behavior, see
Figure 17. Expansion module detail ME412/ME424/ME484
shows the power cooling module (PCM) used in controller enclosures and optional expansion
580W PCM
2
SAS expansion ports
4
Disabled Ethernet port
2
AC Fail LED (Amber/blinking amber)
4
DC Fail LED (Amber/blinking amber)
6
Power connect
LEDs.
is used with ME4 Series
Storage system hardware
15