Cleaning and maintenance
34/50
5.4
Cleaning
DANGER!
Infections can be spread by skin contact!
All objects / device parts which may come into contact with
the user during use, must be disinfected after every use:
–
Handles
–
Adjustment knobs
–
Storage shelf
–
Control panel
–
Protective goggles
NOTE:
Adhere to the stipulated times to ensure thorough disinfec-
tion. Follow the manufacturer's instructions for use.
5.4.1
Cleaning the surfaces
Acrylic glass surfaces
WARNING!
Do not rub with a dry cloth – danger of scratching!
Failure to comply invalidates any warranty claims.
–
For the fast, hygienic and proper cleaning of acrylic
glass surfaces, use specially developed cleaning
agents.
–
Concentrated disinfectants or solvents (e.g. Lysoform,
ethyl alcohol or other fluids containing alcohol) must
never be used for cleaning.
Plastic surfaces
For cleaning the remaining painted and unpainted plastic surfaces, it is best to
simply use warm water and a leather cloth. Never use aggressive cleaning
agents containing alcohol or essential oils. These may lead, in the long run, to
damages not covered by the guarantee.
During cleaning a slight discolouration of the leather cloth by the rubber seals
must be expected for production-related reasons.
Prevent damage to the acrylic glass and plastic surfaces.
–
Remove rings, watches, bracelets etc. before starting cleaning work.
5.4.2
Lamps
Low pressure lamps and filter panels can be cleaned with a damp cloth
and without additional cleaning agents where necessary.
Lamps can be cleaned with ethyl alcohol where necessary.