02/2012
Revision 7
4.7
Connect MP3 player
DANGER!
Danger of hearing damage!
Using earphones or headphones at high volume can result
in permanent hearing damage.
–
Users may connect MP3 players to the light energy device.
1. MP3 connection cable is provided by the studio operator
(1.5 m / 2 x 3.5 mm stereo jack plug).
2. MP3 player: see the documentation from the manufacturer of the MP3
player.
Connect:
–
Plug the MP3 cable (stereo jack plug) into the Audio system.
–
Plug the MP3 cable into the MP3 player.
–
Select the music title and start.
WARNING!
Heat damage to the MP3 player is possible
–
Only place the MP3 player in the designated area.
Cable may break-off, cable jacks may be damaged!
–
Do not pull on the cable when unplugging the MP3 player.
0071106701
Do not set the volume too high.
Operation
Operating Instructions - 27