Operation
24
4.4.1
Navigation
The device is operated with the navigation ring.
Switch on lamps:
Press the button once.
Switch off lamps/interrupt application:
Hold the button.
Select device function (go to pictogram)
e.g. MUSIC
Select sub-function (if available)
Change setting
The LED indicator for the available functions and the navigation ring are illu-
minated in default mode after starting up the device. After selecting a function,
the respective LED indicator and the navigation ring flash for a few seconds.
Settings can be changed during this time.
Operation – Demonstration mode
–
press until
The audio functions and VibraShape can be tested in demonstration mode.
You have 30 seconds in which to select the function.