Table of Contents
Advertisement
Information for the operator
02/2012
Revision 7
2.6.1
Assembly
DANGER!
Personal danger due to electric shock or burns!
–
The assembly and electrical connection must comply
with local and national regulations.
–
The electrical installation must have an easily accessi-
ble disconnect or breaker that complies with overvolt-
age category III.
–
Assembly, installation, upgrading or repair of the device
may only be carried out by specially trained and in-
structed personnel.
Information regarding the disassembly and assembly of the device is avail-
able in the separate assembly instructions. These assembly instructions are
intended solely for use by the manufacturer's service personnel or by qualified
specialists authorized by the manufacturer.
2.6.2
Ventilation
WARNING!
Risk of overheating due to air flow problems!
Operating faults possible.
–
Do not change, obstruct or block the air inflow and
outflow to the device or make any unauthorized
changes to the device. The manufacturer shall bear no
liability for damage or injuries resulting from such ac-
tions.
–
Observe the ventilation system data.
–
Do not set up and operate the device on the transport
pallet!
Data regarding the air supply and ventilation planning is available in the
planning manual (http://support.jkamerica.com). You can also obtain this
data from your distributor or the customer service department (see page 2).
0071106701
Operating Instructions - 9
Hide quick links:
Advertisement
Table of Contents
