Propane Conversion - Montigo DelRay DRL3613NI Installation & Maintenance Manual

Propane Conversion
To convert the DelRay from
Natural Gas to Propane,
install the GCA010 conversion
kit. The unit must be
disconnected from any gas
supply, disconnected from
any electrical supply and
batteries and removed from
any installation cavity.
For input rating, manifold
pressure and orifice size,
refer to sample rating plate
WARNING
This conversion kit shall be installed by a qualified gas fitter in
accordance with the manufacturer's instructions and all applicable
codes and requirements of the authority having jurisdiction. If the
information in these instructions is not followed exactly, a fire,
explosion or production of carbon monoxide may result causing
property damage, personal injury or loss of life. The qualified service
agency is responsible for the proper installation of this kit. The
installation is not proper and complete until the operation of the
converted appliance is checked as specified in the manufacturer's
instructions supplied with the kit.
CAUTION
The gas supply shall be shut off prior to disconnecting the electrical
power, before proceeding with the conversion.
22
Tools required
1). Torx T20 Screw Driver Bit
2). 1/2" Socket Driver
3). 5/32" Allen Key
4). Needle Nose Pliers or
Small Flat Head Screw
Driver
2). 1/4" Socket Driver
Parts included
1). Propane burner orifice
2). Propane pilot orifice
3). Propane valve control
(with mounting screws)
4). Valve conversion label
5). Conversion plate label
6). Conversion technician
identifying label
1. Shut off gas supply.
2. Remove the 2 screws securing the pilot cover to the media
tray. Remove 2 screws on burner clamp.
Figure 13. Removal of pilot cover
3. Burner can now be removed.
Figure 13.b Loosening the venturi
4. Use 1/2" Socket Driver to loosen off the NG gas orifice, replace
with Propane orifice as included in package. #1.15mm
Figure 13.c Removing the orifice
5. Remove natural gas mixer sleeve from burner. Reinstall burner
Figure 13.c Removing the orifice
Installation
XG0226 - 180904