Disabling Thermostat; Fan Speed Control; Accent Light Control - Montigo D3615 Installation & Maintenance Manual

Disabling Thermostat
Some jurisdictions and bedroom installations require the
thermostat to be disabled.
1. Partially take out one battery, see Figure 26k.
2. Insert the battery while holding down the thermostat button.
The remote screen will display 'Clr' while the button is held
down. See Figure 26l.
3. To enable thermostat repeat steps 1-2. The remote screen will
display 'set' while the thermostat button is held down.
XG0222
Figure 29.k
Figure 29.l

Fan Speed Control

The fireplace is equipped with optional hot air circulating fans.
The speed of the fans can be controlled by the Proflame system.
The fan speed can be adjusted through six (6) speeds. To activate
this function use the Mode Key, see Figure 26, to index to the fan
control icon, see Figure 29m. Use the Up/Down Arrow Keys to
turn on, off, or adjust the fan speed. A single "beep" will confirm
reception of the command.
Figure 29.m Fan Speed Control

Accent Light Control

The fireplace may be equipped with accent lights. The auxiliary
function controls the Accent Lights. To activate this function use
the Mode Key, see figure 29, to index to the AUX icon, see figure
29n.
Pressing the Up Arrow Key will turn the light on. Pressing the
Down Arrow Key will turn the light off. A single "beep" will
confirm the reception of the command.
Figure 29.n Light Control
Operation
47