Setting Date And Time - Adam Equipment CCSA series Manual

2.7

SETTING DATE AND TIME

The Real Time Clock (RTC) is used only for the RS-232 output. The Date
and Time can be set as required. The scale will keep the clock running even
when the power is off.
Setting up the clock
• Press and hold the [1c] key when power is first turned on, release the
key when the revision is displayed. The initial displays show the current
date and time set.
" rtC
" "11,14,06" "16,41,35"
• Press the [CE] key to change the date and time. The display will show
the current time format, "H-m-S".
• Enter the time using the numeric keys using a 24 hour clock format,
3:41PM is "154100".
• Press the [Total/↵ ↵ ↵ ↵ ] key to accept the time. The display will show the
current date format.
• Press the [MC/ ] key to change the date format. Available formats
are:
"Y-m-d" year, month, day
"m-d-Y" month, day, year
"d-m-Y" day, month, year
• Press the [Total/↵ ↵ ↵ ↵ ] key to accept the chosen format and then enter the
date in this format.
• Press the [[Total/↵ ↵ ↵ ↵ ] key to accept the date.
An error code will be shown if the time (Err 1) or the date (Err 2) is not the
permissible values. For example, 34
P a g e
11 |
th
day of a month is an invalid entry.
© Adam Equipment Company 2009