MicroNet SP3367NL Quick Installation Manual

Setup 6.
Check the LED indicator and make sure the device is ready for
software configuration.
LED indicator Status Description
ON When the router is powered on
Establishing the connection between ADSL2+
Blinking
Router Modem and Internet Service Provider
Steady
ADSL connection has been established
Blinking Transmitting or receiving packets through
Wireless connections
Off Wireless network is disabled
Blinking WLAN terminal is connecting WPS
Terminal WPS connected and the WPS LED
Steady
will stay on for 5 minutes
Off Not connected to the Internet
Blinking Transmitting or receiving packets through ADSL Link
Steady Connected to the Internet
Off disconnected
LAN
Blinking Transmitting or receiving data from Internet
1~4
Steady
Connection has been established
CE Mark Warning
This equipment complies with the requirements relating to
electromagnetic compatibility of the essential protection
requirement of Council Directive 2004/108/EC on the approximation
of the laws of the Member States. Company has an on-going policy
of upgrading its products and it may be possible that information in
this document is not up-to-date. Please check with your local
distributors for the latest information. No part of this document can
be copied or reproduced in any form without written consent from
the company.
WEEE Directive & Product Disposal
At the end its serviceable life ,this product should not be treated
as household or general waste. It should be handed over to the
applicable collection point for the recycling of electrical and
electronic equipment, or returned to the supplier for disposal.
P/N 2300-0661
5
7
Setup 7.
Insert the CD and follow the on-screen instructions
SP3367NL
Communicate via
Quick Installation Guide
11n 150Mbps WLAN
ADSL2+ Modem Router
Model No.: SP3367NL
6
w w w . m i c r o n e t . c o m . t w