Introduction - Olivetti 3D DESK User Manual

INTRODUCTION

GENERAL SAFETY RULES
Important safety-related information is given in this section that must be observed when installing and using the
printer: you must read attentively and follow these instructions and all other information provided in this manual.
SAFETY WARNINGS
Pictograms are applied to some parts of the printer as safety warnings, these must be attentively observed by
anyone preparing to use the printer
HOT SURFACES
The hot surfaces warning symbol warns of the presence of devices having elevated temperatures.
Always exercise the greatest care and wear safety gloves when using the heated components
HIGH VOLTAGE HAZARD
Exercise great caution: live electrical equipment
MOVING PARTS
Presence of moving parts which must be approached with care
CRUSHING/PINCHING HAZARD
Do not introduce your hands into the machine while it is in function
GROUND TERMINAL
Equipment ground connection points
REMOVAL OF MECHANICAL GUARDS PROHIBITED
Do not open the front door during the printing process. Do not remove the protective bellows of
the worm screw.
GLOVES
When carrying out printing preparatory procedures or maintenance routines, the device may be
hot therefore you should also wear gloves to avoid potential burns.
READ INSTRUCTIONS
It is obligatory to read the User Manual found on the SD Card supplied with the product to
obtain the correct operating instructions.
vi
.
User Manual 386446U-01