Loading The Filament Bobbins - Olivetti 3D DESK User Manual

Loading the filament bobbins

To load correctly the material filaments to be used for printing, follow the procedures below:
1. Remove manually the protection screw from the rear side
2. Insert the cylinder and the washer on the support screw
3. Hand-tighten the screw (do not screw with a wrench, to avoid over-tighten the screw)
Figura 2-8 Protection screw to be removed
Figure 2-9 Bobbin support components and bobbin
Manuale d'uso
2-8 386446U-01