Introduction; General Safety Provisions; Safety Warnings - Olivetti 3D IoT User Manual

INTRODUCTION

GENERAL SAFETY PROVISIONS

Important safety-related provisions are provided in this section which must be observed when installing and
using the printer: read and follow attentively these instructions and all other information provided in this manual.

SAFETY WARNINGS

Pictograms are applied to certain parts of the printer as safety warnings, these warnings must be observed
attentively by anyone preparing to use the printer
HOT SURFACES
The hot surfaces warning symbol warns of the presence of devices having high temperatures.
Always exercise great care and wear safety gloves when manipulating heated components
HIGH VOLTAGE HAZARD
Exercise great caution: live electrical equipment
MOVING PARTS
Moving parts present - approach with great care
CRUSHING/PINCHING HAZARD
Do not introduce your hands into the machine while it is functioning
GROUND TERMINAL
Equipment ground connection points
REMOVAL OF MECHANICAL GUARDS PROHIBITED
Do not open the front door during the printing process. Do not remove the protective bellows of
the worm screw.
GLOVES
When carrying out preparatory procedures for printing or maintenance routines, the device may
be hot therefore you must always wear gloves to avoid burns.
READ INSTRUCTIONS
For the correct operating instructions you must read the User Manual provided on the SD Card
supplied with the product.
596806-02
.
User Manual v