Movement
The Movement menu allows you:
to adjust acceleration of printer movements.
to enable/disable the printing abort if an axis reaches the Endstop point
You are advised not to modify the predefined parameter settings.
Figure 3-14 Axis movement parameter settings
Factory settings
The last command in the Control menu is Default Settings.
To reload the parameter settings configured in the factory, select this command using the jog dialer and then
confirm.
SD Card menu
You can access the SD Card Menu from the Main menu.
Figura 3-15 Main Menu
Selecting this menu using the jog dialer and confirming, you can display the contents of the SD card inserted.
Navigating through the files available, you can select a file and launch its printing.
386446U-01
Manuale d'uso
3-13