Table of Contents
Advertisement
Aligning the printing table
To obtain good printing quality it is of fundamental importance to ensure that the first layer deposited is distributed
uniformly on the printing table.
For this purpose it is essential to ensure that the printing table is aligned correctly.
Although the printer has already been set up in the factory it may be necessary to repeat this operation due to
the stresses caused by transportation.
To align the printing table:
1.
Starting with the display in the Rest mode, press the jog dialer once and turn it to select the Prepare menu.
Figure 2-2 Prepare Menu
2.
Press the jog dialer to access the menu, then select the Bed Setting command.
Figure 2-3 Bed Setting command
3.
Press the jog dialer again. The LCD display becomes completely blue and the extruder assembly moves to
the Home position.
2-2
Manuale d'uso
386446U-01
Advertisement
Table of Contents
