Suspending And Interrupting Printing - Olivetti 3D DESK User Manual

Suspending and interrupting printing

Using the menus you can suspend or cancel a print job after it has been started.
To suspend printing, press the jog dialer and access the menu. Rotate the jog dialer to select the Pause
command then press the jog dialer again.
Printing is suspended and the extruder assembly stops at exactly the same point as printing was interrupted.
Figura 3-2 Suspension and interruption of printing
Once suspended the print, the display shows the initial page with the words "Pause print"; to restart printing all
you have to do is press the jog dialer to confirm.
Figura 3-3 Initial page with the words "Pause print"
By selecting on Tune and Control, you can check and change the temperature of the nozzle and of the bed,
and the filament flow
Manuale d'uso
386446U-01 3-5