Appendix Efiles Stored In The Sd Card - Olivetti 3D DESK User Manual

Appendix E
The SD Card contains – in addition to this user manual – the following files:
1. PRINTING TEST FILES

colosseo (coliseum), in .stl and .gcode formats

gecko, in .stl and .gcode (small and large) formats

logoOlivetti , in .stl and .gcode (small and large) formats

ingranaggio (gear), in .stl and .gcode formats

vaso (pot), in .stl and .gcode formats

Venere (Venus), in .stl and .gcode formats
2. FILE DI SETTAGGIO

"profilo_base.ini", default profile for Cura slicer, optimized for PLA prints.

Temperature setting fot filaments
3. CURA Software

Cura software installation files (free)

User instruction to use Cura software with the 3D DESK Printer
386446U-01
Files stored in the SD Card
Manuale d'uso
C-1