Specifications - Samlexpower Evolution Series Owner's Manual

SECTION 7 | Fault Messages and
Fault Message
SD card unusable!
SD card read error!
SD card write error!
SD card full!
WRITE FAILURE!
OUT OF RANGE!
SECTION 8 |
8.1 SPECIFICATIONS – EVO-RC-PLUS
ITEM
Compatible
Inverter/Chargers
Display
Input/Output Jacks
Cable Set Provided
Environment
Dimensions
Weight
Troubleshooting Guide
• Data logging will not start.
• Check that the format is FAT16/FAT32.
• Check that the capacity is less than 16 GB.
• Re-format the card.
• Data logging stops.
• Remove and re-insert the card.
• Data logging stops.
• Remove and re-insert the card.
• Data logging stops.
• Move or delete files or re-format the card.
• The entered value of programmable parameter could not be written. Call Technical Support.
• The entered value of programmable parameter is out of the programmable range.
Change parameter value to within the specified range.

Specifications

EVO Series Inverter/Charger
TM
LCD Display
LED Indicators
RJ-45
RJ-12
RJ-45 Data Cable (Straight Wired); 10 Meters / 33 ft
Operating
Temperature Range
(W X H X D), mm
(W X H X D), inches
Weight without cable
Weight with cable
Symptoms and Trouble Shooting
DESCRIPTION / SPECIFICATIONS
4 Rows, 20 Character each,
Alpha-Numeric LCD Display
Blue (Status); Red (Fault)
Modular Jack, 8P8C
Modular Jack, 6P6C
-20°C to 60°C
160 x 114.2 x 35.5
6.3 x 4.5 x 1.4
0.3 kg / 0.6 lb
0.4 kg / 1.0 lb
SAMLEX AMERICA INC. | 87