Parameter Setup - Samlexpower Evolution Series Owner's Manual

SECTION 4 |
4.0 "SELECT GROUP" AND "SELECT PARAMETER" MENU MAPS
4.1.1 General Information
Up to 58 operating parameters can be programmed to suit the desired operating conditions.
The programmable parameters have been arranged under 7 Parameter Groups as per details at
Table 4.1 below. "Select Group" Menu Map for accessing the 7 Parameter Groups is shown at
Fig 4.1.
Table 4.1 List of Parameter Group Nos. 1 to 7
Parameter Parameter
Group No. Group Name
1 CHARGE CURVE
2 INPUT SETTING
3 INPUT LOW LIMIT
4 INPUT HIGH LIMIT
5 OTHER FUNCTION
6 TIME SETTING
7 STOP SD CARD
The 1st screen for Group 1 - CHARGE CURVE will be accessed when Enter key is pressed
momentarily from any of the Operating Mode Display Screens detailed at Table 3.1.
Fig 4.1 shows "Select Group" Menu Map for 7 Parameter Groups. Use the Up and Down
keys to navigate to the desired Parameter Group or the Back key to go back to the Operating
Mode Screen. Press Enter to access Parameters in the selected Parameter Group.
For explanation of the format of the "Select Group Screens" shown in Fig 4.1, consider
Group 1 Screen - CHARGE CURVE. The 1st line shows the action i.e. "Select Group". The 2
line shows the name of the "Select Group" - CHARGE CURVE with an asterisk sign * against
it. The asterisk sign * indicates that this Group will be selected when Enter key is pressed.

Parameter Setup

Parameters for battery charging/battery
protection
Parameters for Grid/Generator input
current level, frequency range
Parameters for Grid/Generator input low
voltage level
Parameters for Grid/Generator input high
voltage level
Power Saving/Buzzer/Remote Switch/
Multi-function Relay/etc.
Real Time Clock setting
Shown only when SD Card is inserted.
To stop SD Card accessed and to remove
the SD Card.
Description
"Select Group"
Menu Map
Fig 4.1
SAMLEX AMERICA INC. | 27
nd