Operation - Samlexpower Evolution Series Owner's Manual

SECTION 3 |
3.0 GENERAL INFORMATION
EVO-RC-PLUS Remote Control provides the user with the ability to monitor the operation and
also to modify EVO
Inverter/Charger are adequate for some installations but may have to be modified for others.
This Section provides details on the remote functions, status and menu maps and displays, fault
messages and parameter settings.
3.1 NAVIGATING THE REMOTE
Please refer to the layout at Fig. 1.1.
• LCD Display (1) – The 4-line (20 characters each) LCD display shows status and information
for the EVO Inverter/Charger. All Setup Menus and faults also appear on the LCD display.
TM
• ON/OFF Key (2) – The On/Off Key is used for switching on/ switching off the EVO
Inverter/Charger and also to enter/exit Standby Mode.
• Navigation Keys (5, 6, 7, 8) – These four keys allow simple access to Menu Item that
assists configuring, monitoring, and troubleshooting the EVO
o
Navigation Key Functions:
 Back – Return to previous selection
 Up – Move from lower to upper Menu Screen in various Menu Maps e.g. Fig 3.1 (a)
 Down – Move from upper to lower Menu Screen in various Menu Maps
e.g. Fig 3.1(a)
 Enter – Select/write a particular value or option.
• Status – Blue LED indicator for indicating operating status (see details at Section 6, Table 6.1).
• Fault – Red LED indicator for indicating fault conditions (see details at Section 6, Table 6.1).
• SD Card slot – This slot supports SD memory card (up to 16GB, FAT16/32). The SD Card
is used for data logging of EVO
saving and uploading of programmed parameters. See Section 5: SD Card.
8 | SAMLEX AMERICA INC.

Operation

Inverter/Charger's operating parameters. The default settings in EVO
TM
TM
Inverter/Charger's operational statistics and events and
Inverter/Charger.
TM
TM
TM