Sd Card - Samlexpower Evolution Series Owner's Manual

SECTION 4 |
S e l e c t G r o u p
* C H A R G E C U R V E
S e l e c t P a r a m e t e r
S T O P S D C A R D
1 = Y e s
SECTION 5 |
5.1 SD CARD GENERAL INFORMATION
SD Card slot has been provided for using an SD card for (i) data logging and (ii) saving pro-
grammed parameters. SD card supports FAT16/FAT32 format up to 16GB in size.
When the SD card is inserted, the LCD screen will display the following.
S D C a r d d e t e c t e d
V 2 . X H C
S D C a r d
u n u s a b l e !
!
CAUTION!
Do not remove SD Card when data logging has been enabled (may corrupt files).
Follow "STOP SD CARD" procedure (Section 4.10) before removing the SD Card.
!
ATTENTION!
Ne pas retirer la carte SD lorsque « data loggin » a été activée (peut corrompue les fichiers). Suivez la procé-
dure "STOP SD CARD" (article 4.10 ) avant de retirer la carte SD .
Parameter Setup
Down Key x 6 times
S e l e c t
* S T O P
ð
Enter Key
P l e a s e
ð

SD Card

SD card is detected and shows the Version and capacity. "xx" is
4 G B
the capacity.
Not supported card.
Enter Key
G r o u p
S D C A R D
r e m o v e
S D C a r d
S e l e c t P a r a m e t e r
S T O P S D
ð
0 = N o
If SD Card is not
removed within 30 sec,
the unit will reset.
SAMLEX AMERICA INC. | 77
Down Key x 1 time
C A R D
ð