Assembly/Disassembly; Replacing The Shelf Heating Element - Alto-Shaam HSM-24/5S Service Manual

Replacing the Shelf Heating Element

1
Disconnect the electrical power
source to the merchandiser. Install
lockout/tagout equipment.
3
Remove the electrical service panel
Heate d S h el f M er c han d is e r Se rvice Manu al
?
2
Remove the rear service panel.
4
Record the terminal blocks that the
heating pad wires are installed into.
Disconnect the heating pad wires from
the terminal blocks.
MN -3 9054 Rev 1 4/17
? ? ?
A /D
SSEMBLY
HDC-TS-000609
ISASSEMBLY
Continued on next page
41