Backing Up And Restoring Configurations; Backing Up A Configuration - ABB C1300 User Manual

C1300
Advanced circular chart recorder

3.16 Backing Up and Restoring Configurations

A backup file of the recorder's configuration settings can be
saved to a PC and restored to the recorder using the C1300
Configuration Backup Utility Software (download from
www.abb.com/recorders) and Configurator Cable (part no.
C100/0051 – available from the Company).

3.16.1 Backing Up a Configuration

1
Connect the Configurator Cable to the recorder's
configuration backup port (see Fig. 3.5) and the PC's serial
port.
Configurator Cable (part no. C100/0051)
Fig. 3.5 Configuration Backup Port
5
Run the software 'C1300 Configuration Backup Utility.exe'
on the PC.
6
Save the current configuration – see Fig. 3.6.
7
Exit the C1300 Configuration Backup Utility Software.
8
Disconnect the Configurator Cable.
9
Press the key to return the recorder to normal
operation – see Section 2.3.1, page 8.
58
Configuration Backup Port
2
Press the key to
open the Main Menu.
3
Highlight Common
any of the Configuration
level selections below
Common).
4
Press the and
keys simultaneously
place the recorder into PC
Config Mode.
Select the port to which
1
the configurator cable is
connected
Select 'Upload Config.'
radio button
5
The following message is displayed
Note. The following warning is displayed if an
incorrect port was selected in step
recorder is not connected correctly to the PC.
(or
The following is displayed when upload is
6
complete
to
Fig. 3.6 Backing Up a Configuration
3 Configuration
Assign a name and location
3
to the configuration file to
be saved
Click to save the Click to save the
2 4
configuration backup file configuration backup file
or the
1
IM/C1300 Rev. J