Operation; Display Screens And Operator Keys - ABB C1300 User Manual

C1300
Advanced circular chart recorder

2 Operation

2.1 Display Screens and Operator Keys

Up to two faceplates are fitted to the front of the recorder, each comprising a display screen and associated operator keys – see
Fig. 2.1.
Each high resolution, dot matrix display screen shows the operating and programming information for up to two input channels in a
variety of formats.
Alarm states are indicated by icons in the lower left corner of the display screen(s) – see Fig. 2.3 on page 7.
Display
Screen
Display Screen and Operator Keys
Making a Selection
The first number flashes. Use the
change the value as required – see
Each press of the key selects the next number to
the right. Use the and
as required – see below.
Note
Press to save the new value and advance to the
next screen.
Adjusting and Storing a Parameter Value
Note. Continued pressure on the
Press the keys momentarily to make small adjustments.
Fig. 2.1 Display Screen and Operator Keys
6
Operator Keys
Save selection and
advance to next screen
Select
and keys to
below.
Note
keys to change the value
and
Highlight a
menu item
Use the and
at the cursor position – see
Use the key to move the cursor.
Press to save the new value and advance to the next screen.
Enter/Edit User-defined Information
If Auto Pen Drop is set to Yes (Section 3.4), the
raises/lowers the pen(s) on alternate operations when
Operating Level is selected from the Main Menu.
keys causes the rate of change of the displayed value to increase.
Press to open the main menu screen
Press to advance to the next screen
Main Menu Screen
Cursor
keys to select the character to be displayed
below.
Note
Raise/Lower Pens
2 Operation
W dbSp
key
IM/C1300 Rev. J