C1300
Advanced circular chart recorder
2.5 Totalizer Control
Note. Totalizer control is available only if the totalizer software option is enabled by installation of the appropriate software key
and Totalizer Reset is set to YES – see Section 3.4, page 20.
IM/C1300 Rev. J
Press the
key to open the Main Menu.
Highlight Totalizer Control.
Select Totalizer
Select the totalizer to reset.
Reset Totalizer
Select YES to reset the totalizer.
Confirm Reset Totalizer
Select YES to reset the totalizer.
Note. If YES is selected, the totalizer is reset when the
Return to previous frame.
2 Operation
key is pressed.
17