Pen Function - ABB C1300 User Manual

C1300
Advanced circular chart recorder

3.14 Pen Function

Overview.

Trend Pens – the chart range is configured independently of the engineering range (see Section 3.5, page 24) to enable a
selected part of the engineering range to be used for display thus giving extra detail on the chart.

Event Pens – assigned to digital inputs, alarms, logic equation results and real-time events (if timer software option enabled by
installation of the appropriate software key).
Select Pen Range (in engineering units)
1000
(Eng. Range High)
700
(Pen Range High)
400
(Pen Range low)
0
(Eng. Range Low)
Record Function
or
IM/C1300 Rev. J
Select 'In' Source
*In source takes priority if both
sources enabled
Event Function
Pen Function
Press the key to open the Main Menu.
Highlight Pen Function.
Select Pen
Select the pen to configure.
Pen Function
Select the required pen function:
Off
– No function
Trend – Trend
Event – Event
Pen Source
Select an input source or math block for the selected pen as required.
Return to top of page.
Select 'Out' Source
*Source on
Source off
3 Configuration
Event Pen Chart Position
*Pen 4 at 80%
Pen 3 at 60%
Pen 2 at 40%
Pen 1
at 20%
Source on
Source off
*With Real Time Event Pen
option fitted, Pen 4 is above
100%
55