Replacing The Label Supply Door - Brady BradyPrinter M611 User Manual

Replacing the Label Supply Door

If the printer is accidentally dropped, the printer supply door may come off. If the supply door is not
damaged, it can easily be re-attached to the printer. The supply door must be on the printer and closed
for printing and cutting.
To re-attach the supply door:
1. Insert the supply door locking tab on one side of the printer supply door with its corresponding
locking groove on the printer.
2. Gently squeeze the other side of the supply door enough so its locking tab can slip into the
other locking groove of the printer.
3. Push down to snap the supply door into place.
BradyPrinter™ M611
Replacing the Label Supply Door
supply door locking tab
locking groove on printer
Maintenance
36