Replacing The Cutter Assembly - Brady BradyPrinter M611 User Manual

To remove the cutter blade cover:
1. From inside the supply well, slip your finger
under the right side of the blade cover and
gently pull up to unhook the blade cover.
The blade cover releases easily.
To re-insert the cutter blade cover:
1. Grasp the blade cover from the
top with the cut-out portion of the
blade facing the display screen
(away from the supply well).
2. Pull the yellow flap forward, then
insert the blade tight up against
the yellow flap with the metal tabs
fitting over the outside of the
cutter housing.
The blade cover snaps in easily.

Replacing the Cutter Assembly

To replace the cutter assembly:
1. Remove the cutter blade cover. See "Replacing the Cutter Blade Cover" on page 32.
2. From the home screen, tap Settings.
BradyPrinter™ M611
CAUTION! Handle the plastic housing on the cutter assembly carefully. Do not
insert fingers near cutter. It could pinch or cut.
Maintenance
Replacing the Cutter Assembly
33