USB Host Port
The USB host port serves two purposes.
•
Upgrading firmware and materials database (Y and B) files. See "Upgrading Firmware" on page 29
and "Updating Y and B Values" on page 30.
•
Charging a mobile device, only when the printer is plugged in to an AC power source.
Printer Settings
Use the touch screen on the printer to configure standard settings, such as the language. For an
introduction to using the touch screen, see "Touch Screen" on page 26.
Language
To set the language for text on the touch screen:
1. With the printer turned on, tap Settings.
2. Tap System Configuration, then Language.
3. Tap the desired language. You may need to scroll to see all available languages. Touch the
screen and drag your finger up or down to scroll.
4. Tap
Units of Measure
Set the unit of measure to inches or millimeters.
To set the unit of measure:
1. With the printer turned on, tap Settings.
2. Tap System Configuration, then Measurement Units.
3. Tap either Inches or Millimeters.
4. Tap
BradyPrinter™ M611
to return to the home screen.
to return to the home screen.
Setup
Printer Settings
7