To attach the magnet accessory to the printer:
1. Position the magnet accessory over the screw hole on the bottom of the printer.
2. Flip up the handle on the screw and
use it to hand tighten the screw.
3. Slide the magnet keeper plates off
of the magnets.
Attaching the Strap
Use the included strap to hang the printer.
To attach the strap:
1. With the Brady logo on the
strap facing up, thread the strap
through the loop on the front of
the printer.
BradyPrinter™ M611
Setup
Accessories
24