Brady BradyPrinter M611 User Manual page 38

Maintenance
Cleaning the Printer
2. With the printer turned on, tap Settings.
3. Tap Maintenance, and then tap Clean Print Head.
4. With the ribbon removed, close the lock lever.
5. Set the label supply guide to the widest position.
6. Insert the cleaning card into the label path until it stops against the print head and platen roller.
7. Tap Run to initiate the cleaning routine.
8. After cleaning is complete, remove the cleaning card and dispose of properly.
9. Allow 15 seconds for the print head, platen roller, and label path to dry before reloading labels
and ribbon.
31
BradyPrinter™ M611